      |
Macnaught oil transfer equipment >
OIL TRANSFER EQUIPMENT – Air OPERATED PUMPS
R500S PUMP (STUB)
R500T PUMP (DRUM)
The R500 is an air-operated, high flow, 5:1 ratio oil transfer pump, designed for workshops requiring fluid transfer over distances of up to 50 metres.The R500 is iideal for use with drums and tanks, and through pipelines, one or multiple hose reels and meter/gun dispensing systems.
Features:
| |
- Delivers up to 28 litres (7.4 us gal) per minute
- Suitable for high pressure operations
- Suitable for ATF, engine oil, gear oil & hydraulic oil up to SAE 140
- Built-in pressure release valve for safe operation
- 2" (male) bung adapter
- Suitable for 205 litre drums (optional extension tube available for stub version)
- Quiet and efficient operation
- Fully repairable and servicable
|
 |
|
Technical Data |
Wetted components: |
Aluminium, nitrile rubber, Carbon PTFE, zinc plated carbon steel |
Pump ratio: |
5:1 (oil pressure is 5 times air pressure) |
Output: |
28 L/min (7 US gal per min) of SAE 10 oil at 690 kPa (100 psi) air pressure (free flow) |
Dimensions: |
R500S (stub) 635 mm x 120 mm x 120 mm
R500T (drum)1325 mm x 120 mm x 120 mm |
Maximum Air Pressure: |
1030 kPa (150 psi, 10.3 bar) |
Minimum Air Pressure: |
400 kPa (60 psi, 4 bar) |
Minimum Air Compressor: |
0.28 m³/min (10 cfm) |
Air Inlet: |
1⁄4" NPT (F) |
Pump Inlet: |
3⁄4" BSP or NPT (F) |
Pump Outlet: |
3⁄4" BSP or NPT (F) |
Foot valve inlet |
1" BSP or NPT (F) and 1" UNEF (stub version) |
PLEASE CLICK HERE TO VIEW THE LIST PRICES FOR THESE PRODUCTS |
Flow rates
Material |
Free flow output (per min.) at the pump
Litres/Min (US GAL) |
Output (per min.) through
30m (98ft) x 9.5mm
(3/8") hose and hose end
gun @ 690kPa/100psi
Litres/Min (US GAL) |
Output (per min.) through
30m (98ft) x 12.5mm
(3/8") hose and hose end
gun @ 690kPa/100psi
Litres/Min (US GAL) |
OIL SAE 10 |
28 (7.4) |
6.2 (1.7) |
8.8 (2.4) |
OIL SAE 30 |
27 (7.2) |
4.05 (1.1) |
6 (1.6) |
OIL SAE 90 |
26 (6.9) |
2.3 (0.7) |
3 (0.8) |
Note:
| |
- Flow rates in litres per minute at 700kPa/100 PSI/7 BAR and 23°C.
- Flow rates are a guide only and the actual output may vary from that stated.
- Variations in flow rate can result from compressor volume, air pressure, hose construction, hose fittings, ambient conditions and system pipe work.
|
|
|
Grease couplers
Grease extension hoses
Air equipment
High pressure equipment
Manual equipment
Air line accessories
Oil control gun accessories
Suction tubes
Feeder hose
Fuel filters
Trolleys
General accessories
|
