      |
Macnaught oil transfer equipment >
OIL TRANSFER EQUIPMENT – Air OPERATED PUMPS
The T512 Oilmaster® is an air operated 5:1 ratio stub pump that delivers up to 15 litres per minute. This is a very quiet pump that is ideal for all workshops where transfer of lubricating oils over varying distances through hose reels with dispensing nozzles and/or meters is required.
The T512 Oilmaster®‚ is supplied as a stub pump with a 50mm (2") BSP bung adaptor, and 25mm (1") BSP (F) oil inlet. T512 pump is ideally suited for the Macnaught HG Series Oil Control Guns (refer to page 68/69) and Retracta hose reels.
Features:
| |
- Stub pump for inclusion in a workshop or mobile bulk oil system
- Suitable for use with oils to SAE 140, automatic transmission fluid
- Delivers up to 15 litres (4 US gal) per minute (at the pump)
- Air inlet 1/4" NPT (F)
- Oil inlet 1" BSP (F)
- Oil outlet 1/2" BSP (F)
- 50mm (2") adjustable bung adaptor
- Optional TB25s suction tube available
|
 |
|
Technical Data |
Wetted components: |
Aluminium, zinc and hard chrome plated
carbon steel, brass, and nitrile and
polyurethane rubber |
Pump ratio: |
5:1(oil pressure is the same as air pressure) |
Output: |
15 L/min (4 US gal per min) of SAE 10
oil at 690 kPa (100 psi) air pressure(free flow) |
Maximum Air Pressure: |
1030 kPa (150 psi, 10.3 bar) |
Minimum Air Pressure: |
400 kPa (60 psi, 4 bar) |
Minimum Air Compressor: |
0.08 m³/min. (3 cfm) |
Air Inlet: |
1⁄4" NPT (F) |
Pump Inlet: |
1" BSP or NPT (F) and 1" UNEF |
Pump Outlet: |
3⁄4" BSP or NPT (F) |
PLEASE CLICK HERE TO VIEW THE LIST PRICES FOR THESE PRODUCTS |
Flow rates
Material |
3m (10ft) x 12.5mm (1/2") hose,
10m (33ft) x 12.5mm (1/2") hose reel
and delivery gun |
9m (29ft) x 2.5mm (1/2") hose,
10m (33ft) x 2.5mm (1/2") hose reel
and delivery gun |
OIL SAE 10 |
6.5 ltr (1.7 gal) per min |
6 ltr (1.6 gal) per min |
OIL SAE 30 |
5 ltr (1.4 gal) per min |
5 ltr (1.4 gal) per min |
OIL SAE 90 |
4 ltr (1.1 gal) per min |
3.5 ltr (0.93 gal) per min |
Note:
| |
- Flow rates in litres per minute at 700kPa/100 PSI/7 BAR and 23°C.
- Flow rates are a guide only and the actual output may vary from that stated.
- Variations in flow rate can result from compressor volume, air pressure, hose construction, hose fittings, ambient conditions and system pipe work.
|
|
|
Grease couplers
Grease extension hoses
Air equipment
High pressure equipment
Manual equipment
Air line accessories
Oil control gun accessories
Suction tubes
Feeder hose
Fuel filters
Trolleys
General accessories
|
